電器設備溫升試驗數字化測量預測系統研究
馬丹睿, 金立軍, 趙剛
(1 同濟大學 電子與信息工程學院，上海 201804：2 天水長城開關廠有限公司，甘肅 天水 741018)
摘 要：傳統的溫升試驗系統的測量和記錄設施智能化低，不能完整記錄試驗全過程數據，研究了一個溫升試驗數字化測量分析系統，該系統實現溫升數據全過程記錄，數據采樣、處理精度高，提出了一套穩定溫升預測分析算法，通過通流后1 ～ 3 倍時間常數內的溫升數據，做出符合精度要求的穩定溫升預測，可節約大量研究性試驗的時間。經試驗論證，系統滿足電器設備研究性試驗和型式試驗的要求。
關鍵詞：溫升試驗；數字化測量；預測算法；精度
中圖分類號：TM643 文獻標識碼：A 文章編號：1007-3175(2015)11-0009-04
Study of a Digital Measuring and Predicting System for Electrical Equipment Temperature Rise Test
MA Dan-rui, JIN Li-jun, ZHAO Gang
（1 School of Electronics and Information Engineering, Tong ji University, Shanghai 201804, China;
2 Tianshui Changcheng Switchgear Co., Ltd, Tianshui 741018, China）
Abstract: The traditional equipment of temperature-rising test has low intelligentized capability in measurement and recording. The system cannot record data during test process completely to meet the demands for follow-up researching. The paper studied a measuring system of temperature-rising test to realize the whole process record and the high accuracy data sampling and disposing, and put forward the stable prediction algorithm to estimate the future value of temperature rise with the temperature-rising data during the period of one to three times of time constant, which saved a large number of research test time. Experimental results show that the system meets the requirements of electrical equipment of research tests and type tests.
Key words: temperature rise test; digital measuring; prediction algorithm; precision
參考文獻
[1] 周會高，楊陶莉，趙端慶，等. 淺議高壓開關設備的溫升和機械試驗[J]. 高壓電器，2002，38(5)：60-61.
[2] Xiangzhong Q.A novel on-line measuring system of temperature for power system electric contact[C]//IEEE Power Engineering and Automation Conference (PEAM), 2011：276-279.
[3] GB/T 11022—1999 高壓開關設備和控制設備標準的共用技術要求[S].
[4] Jun L, Yongqiang C, Mingxin Y.The SOPCbased ASF600 wireless temperature measuring
s y s t e m [ C ] / / T h e 2n d I E E E I n t e r n a t i o n a l Conference on Information Management and
Engineering (ICIME), 2010：612-616.
[5] 陳思明， 鄒建強. 基于單片機控制的B u c k 電路在熔斷器溫升試驗中的應用[ J ] . 低壓電器,2010(9)：56-58.
[6] Richard R.Electromagnetic environmental impact of power electronics equipment[J].Proceedings of the IEEE, 2001，89(6)：926-938.
[7] GB/T 2903—1998 銅- 銅鎳( 康銅) 熱電偶絲[S].
[8] 馬明建. 數據采集與處理技術[ M ] . 西安：西安交通大學出版社，2012.
[9] 劉愛華，馬炳烈，王思潤，等. 多片矩形導體載流與發熱研究[J]. 電氣應用，2009，28(24)：46-47.
[10] 錢家驪，袁大陸，楊麗華，等. 高壓開關柜——結構、計算、運行、發展[M]. 北京：中國電力出版社，2006.
[11] 李西園，龔喆，馬昆，等. 基于最小二乘法的熱試驗溫度數據預測[ J ] . 航天器環境工程，2013，30(2)：146-150
