配電網電纜管網規劃方法及其應用
張聶鵬，張明月
鎮江供電公司，江蘇 鎮江 212001
摘 要：給出了一種配電網電纜管網規劃方法，介紹了其研究思路，分析配電網電纜管網現狀，根據負荷增長情況，確定了配電網的目標網架，進而根據規劃區常用的電纜敷設方式和配電網目標網架，測算電纜管網的需求量。經過對某地區實際應用，結果表明該法能夠形成堅強的配電網目標網架，科學合理規劃、應用、維護電纜管網。
關鍵詞：電纜管網；規劃方法；配電網目標網架；運行維護；全過程管理機制
中圖分類號：TM715 文獻標識碼：A 文章編號：1007-3175(2015)12-0050-04
Distribution Network Cable Network Planning Method and Its Application
ZHANG Nie-peng, ZHANG Ming-yue
State Grid Zhenjiang Power Supply Company, Zhenjiang 212001, China
Abstract: This paper gave a kind of distribution network cable network planning method. This paper introduced the research thought that the distribution network cable network was analyzed and according to the load growth situation, the target network frame of the distribution network was determined. According to the commonly used method of laying cable and distribution network planning target network frame, this paper measured the quantity demanded of the cable network. Via practical application in certain area, the results show that this method can form a strong distribution network target network frame, with scientific and reasonable planning, application, maintenance of cable network.
Key words: power cable network; planning method; distribution network target network frame; operation maintenance; whole process of management mechanism
參考文獻
[1] 張鵬飛，鄭中勝，夏磊，等. 城市核心區域配電網架建設目標模型探討[J]. 供用電，2013，30(3)：1-6.
[2] 吳熳紅，楊繼旺. 幾種電力負荷預測方法及其比較[J]. 廣東電力，2004，17(1)：17-21.
[3] 余貽鑫，王成山，肖俊. 城網規劃計算機輔助決策系統[J]. 電力系統自動化，2000，24(15)：59-62.
[4] 樂歡，王主丁，肖棟柱，等. 基于空區推論的空間負荷預測分類分區實用法[J].電力系統自動化，2009，33(7)：81-85．
[5] Q/GDW 1738—2012 配電網規劃設計技術導則[S]．
