固體絕緣環網柜用直動式永磁機構的研制 

王博，林莘 
沈陽工業大學 電氣工程學院，遼寧 沈陽 110870 
 

摘 要：設計了固體絕緣環網柜用直動式永磁機構，采用充電電容放電的勵磁方式來驅動永磁機構，根據斷路器滅弧室的觸頭反力和分閘彈簧的反力進行反力歸算，建立了有限元模型并應用有限元法進行動態仿真。仿真模擬了直動式永磁機構的動作電流以及環網柜的分合閘速度等機械特性，通過固體絕緣環網柜樣機的裝配調試，實際測量了直動式永磁機構的動作電流以及環網柜開關的機械特性數據。試驗結果驗證了理論仿真設計的準確性。
關鍵詞：固體絕緣環網柜；直動式永磁機構；機械特性；有限元法
中圖分類號：TM591 文獻標識碼：A 文章編號：1007-3175(2015)12-0015-04

Development of Direct-Acting Permanent Magnetic Actuator of Solid-Insulated Ring Main Unit 

WANG Bo, LIN Xin 
School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, China 
 

Abstract: This paper designed a direct-acting permanent magnetic actuator of solid-insulated ring main unit, adopting the exciting mode in which the charged capacitors discharged to drive the permanent magnetic actuator. According to the contact counter-force of circuit breakers arc extinguish chamber and separating brakes spring, the counter-forces were carried out reduction and the finite element model was built to carry out dynamic simulation. The action current of direct-acting permanent magnetic actuator was simulated, as well as the divide-shut brake speed of ring main units. Via the assembling debugging of ring main unit prototype, the action current of direct-acting permanent magnetic actuator was measured, together with mechanical characteristics data of ring main unit switch. The test results verify the accuracy of thetheory simulation design.
Key words: solid-insulated ring main unit; direct-acting permanent magnetic actuator; mechanical characteristic; finite element method

參考文獻
[1] 林莘. 永磁機構與真空斷路器[M]. 北京：機械工業出版社，2002.
[2] 李開泰，黃艾香，黃慶懷. 有限元方法及其應用中永磁勵磁的自動處理[M]. 北京：科學出版社，2006.