電力變壓器不同繞組導線換位方式下環流損耗對比分析
任亞軍,韓軍鋒,張峰
(國網洛陽供電公司,河南 洛陽 471000)
摘 要:變壓器隨著容量的不斷增大,線圈的漏磁場不斷增強,從而在運行時,導致各導線間感應出無用的環流損耗迅速增加,為了減小環流損耗,需要進行導線換位。研究了有限元分析方法對單相電力變壓器模型的仿真,提出了普通克里金模型與粒子群算法相結合的新型高效全局優化算法,并比較分析了不同繞組導線換位方式下的變壓器環流損耗大小,得到了最小環流損耗的最佳匝數分配方案。該方法不但保證了優化的準確度,而且進一步縮短了優化中的計算時間。優化結果與當前應用于工業的設計方案相比,其環流損耗得到了很大的降低。
關鍵詞:電力變壓器;繞組導線換位;環流損耗;克里金模型;粒子群算法
中圖分類號:TM41 文獻標識碼:A 文章編號:1007-3175(2021)01-0030-05
Comparative Analysis of Circulating Current Loss in Power
Transformer with Different Winding Wire Transpositions
REN Ya-jun, HAN Jun-feng, ZHANG Feng
(State Grid Luoyang Power Supply Company, Luoyang 471000, China)
Abstract: As the capacity of the transformer continues to increase, the leakage magnetic field of the coil continues to increase, which leads to a rapid increase in the useless circulating current loss induced between the wires during operation. In order to reduce the circulatingcurrent loss, the wire needs to be transposed. The simulation of the single-phase power transformer model by the finite element analysismethod is studied, and a new efficient global optimization algorithm combining the ordinary Kriging model and the particle swarm algorithmis proposed. It also compares and analyzes the circulating current loss of the transformer under different winding wire transposition methods,and obtains the optimal number of turns distribution scheme with the smallest circulating current loss. This method not only guarantees theaccuracy of optimization, but also further shortens the calculation time in optimization. Compared with the design scheme currently appliedin industry, the optimized result has greatly reduced the circulating current loss.
Key words: power transformer; winding wire transposition; circulating current loss; Kriging model; particle swarm optimization
參考文獻
[1] 李曉玉. 電力變壓器大電流連續式繞組環流分析與換位設計[D]. 沈陽:沈陽工業大學,2008.
[2] 黨成濤. 電力變壓器環流損耗計算及軟件開發[D].沈陽:沈陽工業大學,2013.
[3] 賴武聰,羅拓. 電力變壓器線圈繞組導線換位技術[J]. 電工技術,2006(11):20-21.
[4] 郭清滔,黃雄濤,胡琳靜. 換位導線在提高大型電力變壓器抗短路能力中的應用[J] . 變壓器,2010,47(1):19-22.
[5] 于超,謝德馨. 一種通用的螺旋式繞組換位設計方法[J]. 沈陽工業大學學報,2001,23(1):25-27.
[6] 閻秀恪,李曉玉,謝德馨. 變壓器連續式繞組的環流計算與換位研究[J]. 變壓器,2008,45(5):1-4.
[7] XIA Bin, HONG Seokyeon, CHOI Kyung, et al.Optimal design of winding transposition ofpower transformer using adaptive co-Krigingsurrogate model[C]//2016 IEEE Conference on Electromagnetic Field Computation,2016.
[8] XIA Bin, JEONG Gil-Gyun, KOH Chang-Seop.Co-Kriging Assisted PSO Algorithm and ItsApplication to Optimal Transposition Designof Power Trans former Windings for the Reduction of Circulating Current Loss[J].IEEETransactions on Magnetics,2016,52(3):1-4.
[9] KULKARNI S V, KHAPARDE S A.Transformer Engineering[M].Boca Raton:CRC Press,2013.
[10] 宮金林,王秀和. 基于多目標有效全局優化算法的直線感應電動機優化設計[J] . 電工技術學報,2015,30(24):32-37.
[11] 武劍飛. 基于泛克里金模型的電力變壓器繞組導線換位優化設計[D]. 沈陽:沈陽工業大學,2018.