三支柱絕緣子X射線探傷自動旋轉裝置研究及應用
陳拴成1，馮佳瑋2
(1 河南平高電氣股份有限公司，河南 平頂山 467001；
2 西安理工大學 電氣工程學院，陜西 西安 710054)
摘 要：在對三支柱絕緣子進行X 射線探傷檢測時，需要多次裝卡才能完成一件三支柱絕緣子的 X 射線探傷檢測，檢測效率低，勞動強度大。設計了一種自動旋轉裝置，來實現一次裝夾，該裝置可分別沿三支柱絕緣子中心筒體的軸線、三個支柱的軸線進行360°旋轉, 實現對三支柱絕緣子無死角 X 射線探傷檢測，提高了檢測效率和檢測結果可靠性，降低了勞動強度。
關鍵詞：三支柱絕緣子；X 射線探傷；自動旋轉
中圖分類號：TM216 文獻標識碼：B 文章編號：1007-3175(2021)07-0060-03
Research and Application of Automatic Rotating Device for
X-Ray Detection of Tri-Post Insulator
CHEN Shuan-cheng1, FENG Jia-wei2
（1 Henan Pinggao Electric Co., Ltd, Pingdingshan 467001, China;
2 School of Electrical Engineering, Xi’an University of Technology, Xi’an 710054, China）
Abstract: To complete an X-ray detection on tri-post Insulator, the card needs to be installed multiple times, which is in low efficiency but high labor. An automatic rotating device is designed to realize the one-time installing in this paper. This device is able to rotate 360° around the axis of the center cylinder of the tri-post insulator or the axis of the three posts, so as to detect tri-post Insulator from all angles. In conclusion，this device could improve the efficiency and reliability of detections, and could reduce the labor intensity.
Key words: tri-post insulator; X-ray detection; automatic rotation
參考文獻
[1] 吳澤華，王浩然，田匯冬，等. 特高壓 GIL 三支柱絕緣子結構參數分析與優化[J] . 高電壓技術，2018，44(10) ：3165-3173.
[2] 陳蕊，袁端鵬，闞超豪，等. 環氧樹脂絕緣子固化過程中的溫度場仿真與驗證[J] . 絕緣材料，2020，53(11) ：5-9.
[3] 董涵，劉亮華. 環氧澆注件用自動化裝脫模設備核心技術研究[J]. 電工電氣，2017(8) ：58-60.
