基于行波法的牽引網系統故障測距應用研究 

張佩炯 
中鐵二院西北勘察設計有限責任公司，甘肅 蘭州 730030 
 

摘 要：提出了一種利用行波法對牽引網故障測距的應用方案。依據AT牽引網實際電路，在ATP軟件中建立投切并聯電容補償器模型，對機車在牽引網運行時的電流進行仿真分析，得到發生短路時的故障數據，再利用MATLAB軟件對故障數據進行行波法測距，經實驗驗證，可知行波法對牽引網故障測距行之有效。
關鍵詞：牽引變電所；故障測距；行波
中圖分類號：TM922.3 文獻標識碼：A 文章編號：1007-3175(2015)02-0017-05

Application Research of Traction Network System Fault Location Based on Travelling Wave Method 

ZHANG Pei-jiong 
CREEC Northwest Survey and Design Co., Ltd, Lanzhou 730030, China 
 

Abstract: This paper presented a kind of application scheme making use of the travelling wave method to locate faults for the traction network. Based on the actual circuit of the AT traction network, this paper established the model of a switching parallel capacitance compensator in the software ATP to simulate and analyze the currents when the locomotive was running. The short-circuit fault data was obtained and the software MATLAB was used to carry out fault location by the travelling wave method. The experimental verification show that the travelling wave traction network fault location is effective.
Key words: traction substation; fault location; travelling wave

參考文獻
[1] 武中，王志剛，宋述勇，等.電氣化鐵道牽引變電所對電力系統影響及治理的仿真研究[J].中國電機工程學報，2011，31(S1)：77-82.
[2] 吳命利.電氣化鐵道牽引網的統一鏈式電路模型[J].中國電機工程學報，2010，30(28)：52-58.
[3] 楊乃琪，孟軍，駱開源.電氣化鐵道牽引供電系統實驗平臺建設與開發[J].實驗科學與技術，2011，9(5)：136-139.
[4] Yi H, Xiong Y J.Analysison Operating Characteristic for 1000 kV AC UHV Transmission Line[J].Power System Technology,2006，30(15)：1-7.
[5] 陳健鑫.基于信息融合技術的AT牽引網故障測距方法的研究及其仿真分析[J].電力系統保護與控制，2008，36(19)：25-28.