電工電氣雜志社

基于場路耦合的超高壓GIS母線溫度場研究

來源：電工電氣發布時間：2022-08-29 13:29 瀏覽次數：428

基于場路耦合的超高壓GIS母線溫度場研究

王振芹，孫桂林，張永剛，陳連業

(傳奇電氣(沈陽)有限公司，遼寧沈陽 110136)

摘要：超高壓 GIS 母線發熱的最高點主要出現在觸頭、觸指部位。運用有限元方法，建立了帶有觸頭、觸指的 550 kV GIS 母線三維電磁場-流場-溫度場耦合有限元求解模型。將觸指進行合理簡化，計算了母線導體、觸頭、觸指等各部位元件的功率損耗，并將其作為發熱源，耦合至流場-溫度場求解模型，計算出母線溫度場分布。將計算結果與溫升試驗數據對比，觸頭溫度誤差在0.3%，導體溫度誤差在1.04%，外殼溫度誤差在4%，證明了觸指簡化模型的合理性與正確性，對 GIS 母線設計以及觸頭、觸指的溫度場仿真具有指導意義。

關鍵詞： 觸頭；觸指；GIS 母線；耦合場；接觸電阻；溫度場

中圖分類號：TM595 文獻標識碼：A 文章編號：1007-3175(2022)08-0031-05

Research on Temperature Field of EHV GIS Bus

Based on Field-Circuit Coupling

WANG Zhen-qin, SUN Gui-lin, ZHANG Yong-gang, CHEN Lian-ye

（Trench High Voltage Product Ltd, Shenyang 110136, China）

Abstract: The highest heating point of the EHV GIS bus often occurs in contacts and contact fingers. This paper used the finite element method to establish a coupled finite element solution model of the magnetic field, flow field, and temperature field of the 550 kV GIS bus with contacts and contact fingers. This research simplified the contact finger and calculated the power dissipation of components from different parts, such as bus conductor, contact, and finger contact. It took the contact finger as a heat source, coupled to flow field and temperature field solving model, furthermore figure out the bus temperature field distribution. In addition, it compared the calculation results to the data of the temperature rise test. The contact temperature error was 0.3%, the conductor temperature error was 1.04%, and the outside temperature error was 4%. The data verified the rationality and correctness of the simplified model of the contact finger. All in all this research has significance to the bus design and the temperature field of contact and contact finger.

Key words: conract; contact finger; GIS bus; coupled field; contact resistance; temperature field

參考文獻

[1] FUJINAMI H, TAKUMA T, KAWAMOTO T.Development of detection method with a magnetic field sensor forincomplete contact in gas-insulated switches and busconnecting parts[J].IEEE Transactions on Power Delivery，1995，10(1) ：229-236.

[2] PURUSHOTHAMAN S, DE LEON F.Heat-transfer model for toroidal transformers[J].IEEE Transactions on Power Delivery，2012，27(2) ：813-820.

[3] 黎斌.SF₆ 高壓電器設計[M]. 北京：機械工業出版社，2015.

[4] 紐春萍，強若辰，榮命哲，等. 彈簧觸指的穩態溫升仿真與實驗研究[J]. 高壓電器，2015，51(3) ：8-14.

[5] 馮慈璋，馬西奎. 工程電磁場導論[M] . 北京：高等教育出版社，2000.

[6] 吳曉文，舒乃秋，李洪濤，等. 基于光纖光柵的氣體絕緣開關母線溫度在線監測系統[J] . 電力自動化設備，2013，33(4)：155-160.

[7] 丁祖榮. 流體力學[M] . 北京：高等教育出版社，2003.

[8] 劉志剛，耿英三，王建華，等. 基于流場-溫度場耦合計算的新型空心電抗器設計與分析[J] . 電工技術學報，2003，18(6)：59-63.

[9] 路義萍，陳朋飛，鄧海燕，等. 某新型通風方式空冷汽輪發電機轉子三維溫度場[J] . 電工技術學報，2010，25(11) ：29-35.

[10] 趙鎮南. 傳熱學[M]. 北京：高等教育出版社，2008.

返回索引列表

Article retrieval

文章檢索

基于場路耦合的超高壓GIS母線溫度場研究