自動轉換開關電器機械可靠性分析 

陳佳成，高柯，王少鵬 
(杭申集團 杭州之江開關股份有限公司，浙江 杭州 311234) 
 

摘 要： 針對目前CB 級、PC 級兩大類自動轉換開關電器(ATSE) 存在的機械可靠性問題，從機械設計的角度進行分析，根據(jù)各種ATSE 機械結構示意圖，闡述了產(chǎn)生機械故障的主要原因，并提出改進措施，實踐應用表明：改進后其提高了ATSE 機械可靠性，降低了產(chǎn)品故障率。
關鍵詞： 自動轉換開關電器；CB 級；PC 級；機械可靠性
中圖分類號：TM564.8 文獻標識碼：B 文章編號：1007-3175(2015)05-0047-03

Mechanical Reliability Analysis of Auto Transfer Switching Equipment 

CHEN Jia-cheng, GAO Ke, WANG Shao-peng 
（Hangzhou Zhijiang Switchgear Stock Co., Ltd, Hangshen Holding Group Co., Ltd, Hangzhou 311 234, China） 
 

Abstract: In allusion to the mechanical reliability problem of the two types of automatic transfer switching equipment (ATSE) level CB and level PC, this paper carried out analysis from the angle of mechanical design. According to the mechanical structure schematic diagram of various ATSE, this paper expound the main causes of mechanical failure and put forward the improved measures. The practical application show that after improvement, the mechanical reliability of ATSE increases and the products failure rate reduces.
Key words: automatic transfer switching equipment; CB level; PC level; mechanical reliability

參考文獻
[1] GB/T 14048.11-2008 低壓開關設備和控制設備 第6-1部分：多功能電器 轉換開關電器[S].
[2] 連理枝.低壓斷路器設計與制造[M].北京：中國電力出版社，2003.