影響變壓器空載損耗的鐵心疊片結構改進 

李潔，李金輝，齊紅育 
保定天威保變電氣股份有限公司，河北 保定 071056 
 

摘 要： 變壓器的空載損耗主要包括鐵心的磁滯損耗、渦流損耗和鐵心附加損耗，影響空載損耗的原因包括疊片的材料與性能、硅鋼片之間絕緣性能、疊片的剪切方式和疊積方式等。通過在鐵心設計和疊片結構工藝制造上采取相應措施，提高材料的利用率，降低鐵心的附加損耗，提高了變壓器的空載性能。
關鍵詞： 變壓器；鐵心；空載損耗
中圖分類號：TM403 文獻標識碼：A 文章編號：1007-3175(2013)11-0053-04

Iron Core Lamination Improvement to Impact on Transformer No-Load Loss 

LI Jie, LI Jin-hui, QI Hong-yu 
Baoding Tianwei Baobian Electric Co., Ltd, Baoding 071056, China 
 

Abstract: The transformer no-load loss includes iron core hysteresis loss, eddy current loss and iron core supplementary load loss. There are a lot of reasons to impact on no-load loss, such as materials and performance of lamination, insulation property between stalloys, cut and stack modes of lamination and so on. This paper took measures in the respect of iron core design and process manufacture to improve the utilance of materials and to decrease iron core supplementary load loss to raise transformer no-load performance.
             Key words: transformer; iron core; no-load loss

參考文獻
[1] GB/T 6451-2008 油浸式電力變壓器技術參數和要求[S].
[2] 趙靜月，張慶，康運和.變壓器制造工藝[M].北京：中國電力出版社，2009.
[3] 劉傳彝.電力變壓器設計計算方法與實踐[M].沈陽：遼寧科學技術出版社，2002.