三峽左岸11#機組推力頭鏡板返修工藝
任翔
(哈爾濱電機廠有限責任公司,黑龍江 哈爾濱 150040)
摘 要:介紹了三峽左岸11# 機組在推力頭鏡板裝配后在機組運行過程中所產生的問題,通過分體分別加工的方式對推力頭鏡板裝配進行返修,并給出了推力頭修復、鏡板修復及推力頭鏡板整體修復的工藝流程,實際應用結果表明,該方案能夠使機組回裝后繼續穩定運行,為相似結構推力頭鏡板裝配提供返修工藝參考。
關鍵詞:推力頭;鏡板;返修;衍磨鏡面
中圖分類號:TM312 文獻標識碼:B 文章編號:1007-3175(2016)03-0051-03
Thrust Block Runner Plate Repair Technology of Generator Set Eleven in Three Gorges Left Bank
REN Xiang
(Harbin Electric Machinery Company Limited, Harbin 150040, China)
Abstract: Introduction was made to the problems produced in the operational process of generator set eleven in three gorges left bank after the thrust block runner plate assembled. By the way of artifactitious fission mode respectively, the assembly of thrust block runner plate was repaired. This paper gave the technological process of thrust block repair, runner plate repair and the entirety repair of thrust block runner plate. The practical application results show that this scheme can make the generator set continuously operate stably after the generator set reassembled,which provides repairing technology reference for the assembly of thrust block runner plates with similar structure.
Key words: thrust block; runner plate; repair; honing mirror surface
參考文獻
[1] 李興平. 向家壩推力軸承加工工藝研究[ J ] . 東北電力技術,2012(6):28-30.
[2] 吳存柱. 水輪發電機組推力軸承鏡板修復工藝[J].云南電力技術,2007(4):46-47.