環保氣體開關設備彈簧操作機構動力學仿真
陸海強
（嘉興市恒創電力設備有限公司，浙江 嘉興 314000）
摘 要：針對環保氣體開關新型彈簧操作機構，在試制前通過SolidWorks 建立三維模型，并導入到多體動力學仿真軟件進行仿真分析，通過仿真結果修改操作機構傳動部件，使合、分速度滿足要求，同時獲取關鍵部位的力值曲線圖，作為多功能操作塊表面處理及滾輪直徑選取的參考。結合仿真數據及樣機實測結果可知，該多體動力學仿真分析方法能夠較為準確真實地獲取數據，并對實際設計提供參考。
關鍵詞：環保氣體開關；開關設備；動力學仿真；彈簧操作機構
中圖分類號：TM561.2 文獻標識碼：A 文章編號：1007-3175(2017)06-0058-03
Dynamics Simulation of Spring Operating Mechanism of Environmental Protection Gas Switchgear
LU Hai-qiang
（Jiaxing Heng Chuang Electric Equipment Co., Ltd, Jiaxing 314000, China）
Abstract: Aiming at a new type of spring operating mechanism of environmental protection gas switchgear, this paper used the software of SolidWorks to establish the three-dimensional model before trial-manufacture. The model was introduced to the multi-body dynamics simulation software to be carried out simulation and analysis. The simulation result modified the transmission components of the operating mechanism, making closing and breaking speed meet the enterprise standard requirements, and obtaining the curve about force value of the key parts, which provides a reference for the multifunction operating block surface treatment and the idler wheel diameter selection. The combination of the simulation data and the prototype actual measurement result shows that the multi-body dynamics simulation method can simulate the actual model accurately, providing references for the actual design.
Key words: environmental protection gas switchgear; switchgear; dynamics simulation; spring mechanism
參考文獻
[1] 孫竹森，蘭劍. 環保型金屬封閉開關設備的技術特點與發展趨勢[J]. 中國電業( 技術版)，2014(6)：53-56.
[2] 游一民，馬宗雄. 真空斷路器及其多功能操作塊：中國，205388955U[P].2016-07-20.
[3] 崔彥彬，高志，曹云鵬. 基于ADAMS 的高壓斷路器操動機構動力學仿真研究[J]. 機械設計與制造，2006(4)：66-67.
[4] 鄭建榮. ADAMS虛擬樣機技術入門與提高[M]. 北京：機械工業出版社，2002.
